SeaDoo GTI LE Specifications Page 80

  • Download
  • Add to my manuals
  • Print
  • Page
    / 130
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 79
80
MAINTENANCE CHART
The maintenance is very important, if you are not familiar with safe service prac-
tices and adjustment procedures, see your authorized SEA-DOO dealer.
Periodic Inspection
Routine maintenance is necessary for all mechanized products. A periodic inspec-
tion contributes to the products life span.
The following maintenance chart gives guidelines for regular watercraft servicing
scheduled to be performed by you and/or by an authorized SEA-DOO dealer. The
schedule should be adjusted according to operating conditions and use.
IMPORTANT: Schedule for watercraft rental operations or higher number of hour
use, will require greater frequency of inspection and maintenance.
DESCRIPTION FREQUENCY
I: Inspect, verify, clean, adjust, lubricate,
replace if necessary
C: Clean
L: Lubricate
R: Replace
FIRST
10 HOURS
EVERY
25 HOURS OR
3 MONTHS
EVERY
50 HOURS OR
6 MONTHS
EVERY
100 HOURS OR
1 YEAR
TO BE
PERFORMED BY
GENERAL
Lubrication/corrosion protection L C
ENGINE
Support and rubber mount IID
Exhaust system fasteners IID
RAVE valve (if so equipped) CCD
Top end (leak test, piston and ring clearance)
(DI models only)
D
Counterbalance shaft oil level (if so equipped) IID
Spark plug I R D
Ignition timing (all models except DI) I D
TDC setting (DI models only) ➄➈D
COOLING SYSTEM
Flushing C C
Hose and fasteners IID
Engine drain tubes I C
Water flow regulator valve (if so equipped) I D
smo2004-002a.book Page 80 Thursday, August 21, 2003 2:54 PM
www.SeaDooManuals.net
Page view 79
1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 129 130

Comments to this Manuals

No comments